Box 250 insulation fixing 10x210 WITH STEEL PIN

Generalities: The fastening system FMM is used for the installation of insulation systems (ETICS = External Thermal Insulation Composite System) on very durable wall mounts.

The fixing consists of a  and of a galvanized steel pin with a PA6 hood cap covering the thermal bridge.

Applications: For fixing insulation panels made of: - Concrete - Solid and hollow brick - Stone and rock - Polystyrene - Cellular glass - Mineral wood - Polyurethane - Insulation materials resistant to compression

Installation: The plug must be placed after the panel is glued to the wall (the glue must be hardened). Use a drill hole with a 10 mm tip of the appropriate depth and insert the plug for at least 30 mm in the holder. Insert the steel pin into the plug by hitting it with a hammer and thereby causing it to expand. The pin must be fully inserted into the plug with the cap totally embedded in the plug head so as to provide a sufficient hold. The spacing between the plugs and the distance from the edge should be at least 100 mm. The number of plugs per square meter depends on the type of panel, on the thickness and supporting masonry, in accordance with the permissible load values.